brands | investors | corporate
Home - Applications - Strain measurements bundle for Composites / Plastics / Fiberglass

COMPOSITE / PLASTIC / FIBERGLASS — Recommended Components

There is an ASTM (American Society for Testing and Materials) committee specifically dedicated to developing standards necessary for repeatable testing of composite materials. Committee D30 has created over 30 standards and guidelines for testing composites. ASTM D5379 (Shear Properties of Composite Materials by the V-Notched Beam Method) describes a unique test for determining shear modulus, and the line of Shear Modulus Gages developed by Micro-Measurements were designed around this test. ASTM D5450 (Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders) requires the use of rectangular rosette strain gage sensors, like the C2A-06-250WW-350 pattern.

Check here for gages that are available for immediate delivery.

Strain Sensor Reference GuideFeatured Products

Table Search:
Rows Per Page:
Page Controls:
SeriesDatasheetDescription
3-Element Rectagular Rosette Pattern: 0.125" active grids, temperature compensated (steel and aluminum), encapsulated, 10' of pre-attached cable (no soldering). For aerospace, medical, and many more.
Tee Rosette Pattern: 0.125" active grids, temperature compensated (steel and aluminum), encapsulated, 10' of pre-attached cable (no soldering). For aerospace, medical, and many more.
Linear Pattern: 0.125" active grid, temperature compensated (steel and aluminum), encapsulated, 10' of pre-attached cable (no soldering). For aerospace, medical, and many more.
Linear Pattern: 0.125" active grid, temperature compensated (steel and aluminum), encapsulated, large copper tabs. For automotive, aerospace, medical, and many more.
3-Element Rectangular Rosette Pattern: 0.125" active grids, temperature compensated (steel and aluminum), encapsulated, large copper tabs. For automotive, aerospace, medical, and many more.
Tee Rosette Pattern: 0.125" active grids, temperature compensated (steel and aluminum), encapsulated, large copper tabs. For automotive, aerospace, medical, and many more.
Widely used general-purpose gage.
Linear Pattern: 0.250" active grid, temperature compensated (composite and steel), encapsulated, large copper tabs. For automotive, aerospace, medical, and many more.
Stacked, 0-45-90 rosette for use in applications involving limited gaging areas or steep strain gradients.
Protective Coating
General-purpose adhesive that is highly resistant to moisture and most chemicals. Room-temperature curing. Hard, water-resistant coating
Includes: C032A, C032B, C085C, C085D
Includes: SSH-1 Surgical Shears, STW-1 Tweezers,BTW-1 Tweezer,DPR-1 Dental Probe,SSC-1 Surgical Scalpel and Blade,SSC-2 Replacement Scalpel Blades,SSS-1 Steel Scale,DP-1 4-H Drafting Pencil,DWC-1 Diagonal Cutters,NNP-1 Needle-Nosed Pliers,ATS-2 Gage Application Tool Set,GT-11 Camel's Hair Brush,SPT-1 Stainless Steel Mixing Spatula,SPT-2 Stainless Steel Mixing Spatula,MHG-1 Master Mite Heat Gun,MHG-2 Master Mite Heat Gun,PCT-2M Gage Installation Tape,PDT-3 Paper Drafting Tape PLY-001 Kapton Film,MJG-2 Mylar Tape,TFT-2 Thermosetting Fiberglass Tape,FGC-1 Woven Fiberglass Cloth,TFE-2 High Modulus TFE Teflon with Silicone Mastic,HSC-1 Spring Clamp,HSC-2 Spring Clamp,HSC-3 Spring Clamp,GT-12 Neg'ator Constant Force Extension Spring Clamp,TFE-1 Teflon Film,GT-14 Pressure Pads and Backup Plates,SGP-1 Silicone Rubber,SGP-2 Silicone Rubber
Includes CSM-3 Degreaser, GC-6 Isopropyl Alcohol, Conditional A, MCA-1, MCA-2, MN5A-1,  MN5A-2, SCP-1, SCP-2, SCP-3, GC-5, TEC-1, CSP-1, GSP-1
Includes: 361A-20R Solder,361-40R Solder,430-20S Solder,450-20R Solder,450-20S Solder,570-28R Solder,1240 FPA Solder,FAR-2 M-Flux AR Kit,RSK-1 Rosin Solvent Kit,RSK-2 Rosin Solvent Bulk,RSK-4 Rosin Solvent Kit,FSS-1 M-Flux SS Kit,M5S-1 Mark V Soldering Station,M5S-2 Mark V Control Unit Only,M5S-3 Mark V Soldering Pencil Only,M5S-A Soldering Tip,M5S-B Soldering Tip,M5S-C Soldering Tip,M5S-D Soldering Tip,MARK IX Soldering Station,M9S-1-115 Mark IX Soldering Unit,M9S-1-230 Mark IX Soldering Unit,M9S-1-230 CE Mark IX Soldering Unit,M9S-A Soldering Tip,M9S-B Soldering Tip,M9S-RS Soldering Tip,WRS-1 Resistance Soldering Unit,WRS-2 Resistance Soldering Unit,WRS-A Replacement Electrodes